TOTAL PRO GF-30 1.75

54,00 €
Maksudeta

TOTAL PRO GF-30 is impact-resistant glass-filled (30%) composite based on TPU with heat resistance up to 130°C or printing large gears, strong bodies, mechanically loaded parts, aerodynamic body kits for cars.

It has high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane.

DUE to low shrinkage (up to 0.8%), good interlayer adhesion and high abrasive resistance, TOTAL PRO GF-30 plastic will be an excellent alternative to composites based on polyamides. Perfectly amenable to drilling, threading.

For best results, it is recommended to dry for 2-3 hours before printing at a temperature of 60-70°C.

ATTENTION! Plastic is abrasive, it is recommended to print using a steel nozzle. 

Värvus
Kogus

369918465098
3 Tooted

Lisainfo

Bed temperature
60-100°
Density
1.45 g/cm3
Active cooling fan
if necessary 20-60%
Nozzle temperature
230-250°С
Print speed
до 60 mm/s
Flow
95-100%
Nozzle diameter
up to 0.4 mm (min)
Min. layer height
0.15 mm
Термостойкость (min / max)
от -50 до +130°С
Max. roundness deviation
0.03 mm
Net weight on reel
250 m
Shore hardness D
73
Elongation at break
25%
the modulus of elasticity in tension
3000 MPa
Force at break
90 MPa
Shrinkage in the manufacture of products
0.2-0.8%

Eriviited

ean13
0369918465098
upc
369918465098