A material with programmable foaming during printing. By varying the speed, flow and temperature of printing, it was possible to obtain different density of the polymer in a printout with 100% filling, from 0.9 to 0.55g / cm3.

WAX3D Base is a model wax composition for printing according to FDM / FFF technology, for subsequent investment casting. It has low ash content (less than 0.01%), which is extremely important for this technology. This material is positioned as a good alternative to standard technology for the production of waxes, but you should take into account the limitations of printers then it comes to details. That is, for the most part, it is intend

Quick to print and durable anti-COVID-19 mask

Before casting the wax, you need this very wax printed. I will use WAX from “Filamentarno!” WAX is a wax in the form of a filament.

Today I’ll tell you how we made Death Gun mask form one notorious site.

Welcome 3D printing enthusiasts and professionals! Filamentarno! is back for –boring- lectures on our plastics postprint. Today we will tell you how to transform and colorize a one-color product so that it is not as painfully dull :)

A quick guide how to print in stripes

It’s been a year and a half since we started selling our model wax composition for 3D printing of wax molds for metal casting. At first, there were many doubts, that this material was needed by anyone at all. There were fears that the composition of values of this material is beyond economic feasibility. We had to experiment a lot, work with foundries across the country, communicate with both the foundry workers and the end customers of the casti