ABS/PA GF-8 1.75
€54.00
No tax
ABS/PA GF-8 - Composite based on ABS/PA (a mixture of Acrylonitrile butadiene styrene and polyamide PA6) with the addition of 8% glass fiber.
It is suitable for printing final products where high impact resistance and UV resistance are required.
Inert to most available chemical solvents (ideal for printing under-hood parts and autotutting).
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.
369918465593
2 Items
Data sheet
- Bed temperature
- 110-120°С
- Density
- 1.16 g/cm3
- Active cooling fan
- avoid
- Nozzle temperature
- 260-300°С
- Print speed
- до 70 mm/s
- Flow
- 97-100%
- Nozzle diameter
- up to 0.4 mm (min)
- Min. layer height
- 0.1 mm
- Термостойкость (min / max)
- от -50 до +120°С
- Max. roundness deviation
- 0.02 mm
- Net weight on reel
- 265 m
- Shrinkage in the manufacture of products
- 0.2-0.3
ABS/PA GF-8 - Composite based on ABS/PA (a mixture of Acrylonitrile butadiene styrene and polyamide PA6) with the addition of 8% glass fiber.
It is suitable for printing final products where high impact resistance and UV resistance are required.
Inert to most available chemical solvents (ideal for printing under-hood parts and autotutting).
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.