TOTAL PRO GF-10 1.75

€52.00
No tax

TOTAL PRO GF-10 is impact-resistant glass-filled (10%) TPU-based composite with heat resistance up to 110°C for printing large gears, durable housings, mechanically loaded parts, aerodynamic body kits for cars.

It has high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane..

Due to low shrinkage (up to 0.9%), good interlayer adhesion and high abrasive resistance, TOTAL PRO GF-10 plastic will be an excellent alternative to polyamides-based composites..

Perfectly amenable to drilling, threading..

For best results, it is recommended to dry for 2-3 hours before printing at a temperature of 60-70°C. .

ATTENTION! Plastic is abrasive, it is recommended to print using a steel nozzle.

Quantity
Soon

369918465081

Data sheet

Bed temperature
60-100°
Density
~1.4 g/cm3
Active cooling fan
if necessary 20-60%
Nozzle temperature
230-250°С
Print speed
до 100 mm/s
Flow
95-100%
Nozzle diameter
up to 0.4 mm (min)
Min. layer height
0.1 mm
Термостойкость (min / max)
от -50 до +110°С
Max. roundness deviation
0.03 mm
Net weight on reel
250 m
Shore hardness D
85
Elongation at break
15%
the modulus of elasticity in tension
3000 MPa
Force at break
~75 MPa
Vicat softening temperature
110°C
Shrinkage in the manufacture of products
0.5-0.9%
chat Comments (0)
No customer reviews for the moment.