TITAN PRO GF-12 1.75
€58.00
No tax
TITAN PRO GF-12 is structural ABS based composite reinforced with fiberglass.
Fiberglass content is 12%.
It has outstanding strength characteristics. Increased hardness, resilience, tensile and compressive strength, low shrinkage during printing.
369918465074
Data sheet
- Bed temperature
- 0-110°С
- Density
- 1.16 g/cm3
- Active cooling fan
- avoid
- Nozzle temperature
- 260-290°С
- Print speed
- up to 100 mm/s
- Flow
- 100%
- Nozzle diameter
- up to 0.4 mm (min)
- Min. layer height
- 0.15 mm
- Термостойкость (min / max)
- от -50 до +110°С
- Max. roundness deviation
- 0.03 mm
- Net weight on reel
- 300 m
- Shore hardness D
- N/A
- Elongation at break
- 3%
- the modulus of elasticity in tension
- ~4,5 GPa
- Force at break
- ~60 MPa
- Vicat softening temperature
- 118°C
- Shrinkage in the manufacture of products
- 0.2-0.3
TITAN PRO GF-12 is structural ABS based composite reinforced with fiberglass.
Fiberglass content is 12%.
It has outstanding strength characteristics. Increased hardness, resilience, tensile and compressive strength, low shrinkage during printing.